jagomart
digital resources
picture1_Csat3 Manual


 186x       Filetype PDF       File size 0.61 MB       Source: www.eol.ucar.edu


File: Csat3 Manual
csat3 three dimensional sonic anemometer instruction manual revision 3 98 copyright c 1996 1998 campbell scientific inc warranty and assistance the is warranted by campbell scientific csat3 three dimensional sonic ...

icon picture PDF Filetype PDF | Posted on 08 Oct 2022 | 3 years ago
Partial capture of text on file.
           CSAT3 THREE DIMENSIONAL SONIC ANEMOMETER
                   INSTRUCTION MANUAL
                       REVISION:  3/98
            COPYRIGHT (c) 1996-1998 CAMPBELL SCIENTIFIC, INC.
                                                              WARRANTY AND ASSISTANCE
                     The                                                                          is warranted by CAMPBELL SCIENTIFIC,
                           CSAT3 THREE DIMENSIONAL SONIC ANEMOMETER 
                     INC. to be free from defects in materials and workmanship under normal use and service for twelve (12)
                     months from date of shipment unless specified otherwise.  Batteries have no warranty.  CAMPBELL
                     SCIENTIFIC, INC.'s obligation under this warranty is limited to repairing or replacing (at CAMPBELL
                     SCIENTIFIC, INC.'s option) defective products.  The customer shall assume all costs of removing,
                     reinstalling, and shipping defective products to CAMPBELL SCIENTIFIC, INC.  CAMPBELL SCIENTIFIC,
                     INC. will return such products by surface carrier prepaid.  This warranty shall not apply to any CAMPBELL
                     SCIENTIFIC, INC. products which have been subjected to modification, misuse, neglect, accidents of
                     nature, or shipping damage.  This warranty is in lieu of all other warranties, expressed or implied, including
                     warranties of merchantability or fitness for a particular purpose.  CAMPBELL SCIENTIFIC, INC. is not
                     liable for special, indirect, incidental, or consequential damages.
                     Products may not be returned without prior authorization.  To obtain a Returned Materials Authorization
                     (RMA), contact CAMPBELL SCIENTIFIC, INC., phone (435) 753-2342.  After an applications engineer
                     determines the nature of the problem, an RMA number will be issued.  Please write this number clearly on
                     the outside of the shipping container.  CAMPBELL SCIENTIFIC's shipping address is:
                                         CAMPBELL SCIENTIFIC, INC.
                                         RMA#_____
                                         815 West 1800 North
                                         Logan, Utah 84321-1784
                     CAMPBELL SCIENTIFIC, INC. does not accept collect calls.
                     Non-warranty products returned for repair should be accompanied by a purchase order to cover the repair.
                                             815 W.  1800 N.               Campbell Scientific Canada Corp.        Campbell Scientific Ltd.
                                             Logan, UT 84321-1784          11564 -149th Street                     Campbell Park
                                             USA                           Edmonton, Alberta T5M 1W7               80 Hathern Road
                                             Phone  (435) 753-2342         CANADA                                  Shepshed, Leics. LE12 9RP
                                             FAX  (435) 750-9540           Phone  (403) 454-2505                   ENGLAND
                                             www.campbellsci.com           FAX  (403) 454-2655                     Phone  (44)-50960-1141
                                                                                                                   FAX  (44)-50960-1091
                  CSAT3 THREE DIMENSIONAL SONIC ANEMOMETER
                             INSTRUCTION MANUAL
                             TABLE OF CONTENTS
                                                             PAGE
           1. GENERAL.................................................................................................................................... 1
           2. SPECIFICATIONS..................................................................................................................... 1
           3. INITIAL SETUP.......................................................................................................................... 2
           3.1  Factory Settings......................................................................................................................... 2
           3.2  SDM Address............................................................................................................................ 2
           4. INSTALLATION.......................................................................................................................... 3
           4.1  Orientation................................................................................................................................. 3
           4.2  Mounting.................................................................................................................................... 3
           4.3  Leveling..................................................................................................................................... 5
           4.4  Fine Wire Thermocouple........................................................................................................... 5
           5. WIRING......................................................................................................................................... 5
           6. CSAT3 OUTPUTS..................................................................................................................... 6
           6.1  SDM........................................................................................................................................... 6
           6.2  RS-232 Output........................................................................................................................... 6
           6.3  Analog Output............................................................................................................................ 6
           7. OPERATIONAL PRINCIPLES.............................................................................................. 7
           8. CSAT3 TRIGGER...................................................................................................................... 7
           8.1  Sampling Modes........................................................................................................................ 8
           9. DATA PIPELINE DELAY
                              ......................................................................................................... 9
           10. DATALOGGER PROGRAMMING USING SDM............................................................ 10
           10.1 SDM-CSAT3 (P107)................................................................................................................ 10
           10.2 Diagnostic Word...................................................................................................................... 11
           10.3 SDM-Group Trigger (P110)..................................................................................................... 12
           10.4 Example Datalogger Program................................................................................................. 12
           11. MAINTENANCE....................................................................................................................... 13
           12. CALIBRATION
                        .......................................................................................................................... 14
                                                                I
            TABLE OF CONTENTS
                                                APPENDICES
            A.   EXAMPLE FLUX PROGRAM.............................................................................................A-1
            B.   SERIAL COMMUNICATIONS WITH THE CSAT3.......................................................B-1
            B.1     CSAT3 RS-232 Commands...................................................................................................B-1
            B.2     CSAT3 Binary Data Output Format........................................................................................B-3
            B.3     Words 0 Through 3.................................................................................................................B-3
            B.4     Word 4....................................................................................................................................B-4
            B.5     CSAT3 RS-232 Status Format...............................................................................................B-5
            C.   CSAT3 MEASUREMENT THEORY..................................................................................C-1
            C.1     Theory of Operation................................................................................................................C-1
               C.1.1    Wind Speed.....................................................................................................................C-1
               C.1.2    Temperature....................................................................................................................C-1
            D.   SDM COMMUNICATIONS AND LONG SIGNAL CABLES......................................D-1
            D.1     Brief Description of SDM Clock Rates....................................................................................D-1
            D.2     CR23X Example.....................................................................................................................D-1
                                                   FIGURES
            4-1     CSAT3 Coordinate System and Mounting Hardware................................................................ 4
            4-2     CSAT3 Sonic Anemometer, KH20 Krypton Hygrometer
                        and FW05 Fine Wire Thermocouple................................................................................... 4
            8-1     Typical Average CSAT3 Power Requirements at + 12 VDC..................................................... 9
            9-1     CSAT3 Pipeline Delay............................................................................................................... 9
            B-1     PC as the Trigger Source.......................................................................................................B-2
            B-2     CSAT3 as the Trigger Source................................................................................................B-3
                                                    TABLES
            3-1     SDM Addressing Scheme......................................................................................................... 3
            5-1     CSAT3 Power............................................................................................................................ 5
            5-2     CSAT3 SDM Output to a CR23X and CR10(X) Datalogger...................................................... 5
            5-3     CSAT3 SDM Output to a 21X Datalogger................................................................................. 5
            5-4     CSAT3 SDM Output to a CR9000 Datalogger.......................................................................... 5
            5-5     CSAT3 RS-232 Output Pin Out................................................................................................. 5
            5-6     CSAT3 Analog Output Wiring.................................................................................................... 6
            5-7     FW05/FWTC-C-L35 Fine Wire Thermocouple......................................................................... 6
            6-1     CSAT3 Outputs......................................................................................................................... 6
            6-2     Calibration for Analog Outputs .................................................................................................. 7
            10-1    SDM-CSAT3 (P107) Instruction Parameters........................................................................... 10
            10-2    CR23X and 21X Execution Interval and CSAT3 Execution Parameter................................... 11
            10-3    CR10(X) Execution Interval and CSAT3 Execution Parameter............................................... 11
            10-4    Diagnostic Word...................................................................................................................... 11
            10-5    CSAT3 Diagnostic Flags......................................................................................................... 12
            A-1     CR23X Sensor Connections...................................................................................................A-2
            B-1     RS-232 Command Codes......................................................................................................B-1
            B-2     RS-232 Output, Response to the U or W Command.............................................................B-3
            B-3     Converting u  Wind from Word 0............................................................................................B-3
            B-4     Converting ux Wind from Word 1............................................................................................B-3
                               y
            II
The words contained in this file might help you see if this file matches what you are looking for:

...Csat three dimensional sonic anemometer instruction manual revision copyright c campbell scientific inc warranty and assistance the is warranted by to be free from defects in materials workmanship under normal use service for twelve months date of shipment unless specified otherwise batteries have no s obligation this limited repairing or replacing at option defective products customer shall assume all costs removing reinstalling shipping will return such surface carrier prepaid not apply any which been subjected modification misuse neglect accidents nature damage lieu other warranties expressed implied including merchantability fitness a particular purpose liable special indirect incidental consequential damages may returned without prior authorization obtain rma contact phone after an applications engineer determines problem number issued please write clearly on outside container address west north logan utah does accept collect calls non repair should accompanied purchase order cove...

no reviews yet
Please Login to review.